100 series pumpheads
Iconic flip-pumps for low flows up to 510 ml/min. Accurate flow performance to medium pressures.
Pumpheads
Call +1 289 588 1988
The 100 series combines performance, practicality and design. With its iconic flip-top design it is an industry standard OEM product in medical device, biotechnology and diagnostic applications, and very popular in many other applications too. Delivering accurate, repeatable and low-pulse flow rates in a compact size, the 100 series is available in two versions; 114DV for tube life and 114 DVP for higher pressure. Pumps are highly engineered to deliver long tube life. Available in a range of colours and options including cover-open sensor, rotation sensor and customised occlusion.
Motor types | DriveSure brushless DC motor, Fixed speed DC motor, NEMA 17 stepper motor, Stepper motor, Variable speed brushless DC motor |
Pumphead options | 114DV, 114DVP |
Standards | BS EN 55011-2016+A2-2021, BS EN 61010-1, BS EN IEC 61326-1-2021, CE, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, RoHS, UL 61010-1:2012/R:2019-07 |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Flow Rate (mL/min) by tube bore based on 0.1 rpm (Min) to 410 rpm (Max) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pumphead | 0.5 mm | 0.8 mm | 1.6 mm | 2.4 mm | 3.2 mm | 4.0 mm | 4.8 mm | |||||||
Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | |
114DV | 0.002 | 9.3 | 0.004 | 17.4 | 0.014 | 57.4 | 0.029 | 118 | 0.048 | 195 | 0.068 | 276.8 | 0.085 | 349 |
114DVP | 0.002 | 9.3 | 0.004 | 17.4 | 0.014 | 57.4 | 0.029 | 118 | 0.048 | 195 | 0.068 | 276.8 | 0.085 | 349 |
Performance data is based on a 48 V DC power supply, pumping water, with 0 bar inlet and discharge pressure. Actual performance is dependent on power supply voltage (DriveSure range 12 V to 48 V DC). For further information contact your local Watson-Marlow representative.
Flow rates (ml/min) Tubing 1.6 mm wall | ||||
---|---|---|---|---|
Tube bore (mm) | (ml/rev) | Speed (rpm) | ||
100 | 400 | 600 (intermittent) | ||
0.5 | 0.02 | 2.2 | 9.1 | 13.5 |
0.8 | 0.04 | 4.3 | 17 | 26 |
1.6 | 0.14 | 14 | 56 | 84 |
2.4 | 0.29 | 29 | 115 | 175 |
3.2 | 0.47 | 47.5 | 190 | 285 |
4.0 | 0.67 | 67 | 270 | 405 |
4.8 | 0.85 | 85 | 340 | 510 |
Flow rates (ml/min) Tubing 1.6 mm wall | ||||
---|---|---|---|---|
Tube bore (mm) | (ml/rev) | Speed (rpm) | ||
60 | 190 | 350* | ||
0.5 | 0.02 | 1.4 | 4.3 | 8.0 |
0.8 | 0.04 | 2.6 | 8.2 | 15 |
1.6 | 0.14 | 8.4 | 26.5 | 49 |
2.4 | 0.29 | 17.5 | 55 | 100 |
3.2 | 0.47 | 28.5 | 90.5 | 165 |
4.0 | 0.67 | 40.5 | 128 | 235 |
4.8 | 0.85 | 51 | 160 | 300 |
*Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore.
Flow rates (ml/min) Tubing 1.6 mm wall | ||
---|---|---|
Tube bore (mm) | Speed (rpm) | |
8 | 408 | |
0.5 | 0.16 | 8 |
0.8 | 0.32 | 16 |
1.6 | 1.10 | 57 |
3.2 | 3.80 | 194 |
4.8 | 6.80 | 347 |
Flow rates are for guidance only at 0 bar. Always test pumphead flow capability in the relevant fluid system
100 DriveSure ADC/En/Pn | 100 ST/DV | 100 FD/DV | |
---|---|---|---|
Motor types | NEMA 17 stepper motor | Stepper motor | Fixed speed DC motor |
Pumphead options | 114DV, 114DVP | 114DV | 114DV |
Number of rollers | 4 | 4 | 4 |
Number of channels | 1 | 1 | 1 |
Min. flow rate | 0.002 ml/min | 2.2 ml/min | 1.4 ml/min |
Max. flow rate | 349 ml/min | 510 ml/min | 300 ml/min |
Min. operating speed | 0.1 rpm | 0 rpm | |
Max. operating speed | 410 rpm | 600 rpm | 350 rpm |
Speed Resolution | 0.1 rpm | ||
Supply voltage | 12 V to 48 V DC | 24 V DC | 12 V DC, 12 V DC, 24 V DC, 24 V DC |
Operating temperature range | 5 °C to 40 °C | -10 °C to 45 °C | -10 °C to 45 °C |
Operating temperature range | 41 °F to 104 °F | 14 °F to 113 °F | 14 °F to 113 °F |
Rated Power | 75 W | ||
Power consumption | 10W | 5W | |
Control options | 0–10 V, 2–2000 Hz, 4–20 mA, EtherNet/IPâ„¢, Fixed speed, Prime speed, PROFINET® | Fixed speed | |
Alarms | Cover-open, Hardware fault, Over current, Over temperature, Software fault, Speed, Stall, Under/over voltage | ||
Outputs | Fault, Tacho | ||
External Inputs | Prime switch | ||
Weight | 0.8 - 0.9 kg | 0.45 kg | 0.3 kg |
Weight | 1.764 - 1.984 lbs | ||
Location | Indoor, Enclosure | Indoor, Enclosure | Indoor, Enclosure |
Ingress Protection | IP66 capable panel sealing | ||
Humidity | 80 % up to 31 °C (88 °F), decreasing linearly to 50 % at 40 °C (104 °F) | ||
Noise | <60 dB(A) | ||
Max. altitude | 2000 m | ||
Max. altitude | 6561 ft | ||
Standards | BS EN 55011-2016+A2-2021, BS EN IEC 61326-1-2021, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, UL 61010-1:2012/R:2019-07 | ||
Certification and compliance | CB Certificate, EMC, NRTL certification | ||
Compatible tubing bore size | 0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm | 0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm | 0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm |
Compatible tubing wall thickness | 1.6 mm | 1.6 mm | 1.6 mm |
A | B | C | D | E | F | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
mm | in | mm | in | mm | in | mm | in | mm | in | mm | in |
73 | 2.87 | 74 | 2.91 | 98 | 3.85 | 128 | 5.04 | 73 | 2.87 | 89 | 3.50 |
Pumphead body assembly | Grilamid PA12, IXEF PARA |
Pumphead body assembly | Grilamid PA12, Polyacrylamide—IXEF (PARA) |
Pumphead rotor assembly | IXEF PARA |
Pumphead rotor assembly | FPM rubber, Polyacrylamide—IXEF (PARA), PTFE filled PBT, Stainless steel |
Pumphead roller assembly | PTFE filled PBT |
Bearings | Stainless steel |
Adaptor plate | IXEF PARA |
Driveshaft | Stainless steel |
Springs | Stainless steel |
Motor | Aluminium, Plasma nitride coated stainless steel |
Controller Housing | ABS/PC, Aluminium |
Mounting plate assembly | Nitrile, Polyacrylamide (PARA)-halogen free, UL94 V-0 rated, Thermoplastic elastomer (TPE) |
Information listed covers the complete range. For detailed specifications of individual models/components refer to product reference manual or contact WMFTS representative.
0 = Complete pump | 4 = ADC | 1 = 1 m (3.28 ft) cable | 0 = No pumphead | 0 = No pumphead | 0 = No pumphead |
6 = Drive only | 8 = En (EtherNet/IPTM) | 3 = 3 m (9.84 ft) cable | 1 = Standard colour | A = 114DV | S = Standard pressure |
9 = Pn (PROFINET®) | 2 = Black | P = Plus pressure | |||
3 = White |
Accessories and Spares | |
---|---|
Product | Product code |
100 Series DriveSure Sealed Mounting Plate / Sensor | 019.IPMP.DVS |
DriveSure cable pack - 24 V power supply/USB-C - trials only * | 009.24CP.DVS |
DriveSure cable pack - 48 V power supply/USB-C - trials only * | 009.48CP.DVS |
1 m Power Cable DriveSure ADC/En/Pn | 009.1PW.DVS |
3 m Power Cable DriveSure ADC/En/Pn | 009.3PW.DVS |
1 m Control Cable DriveSure ADC | 009.1CC.DVS |
3 m Control Cable DriveSure ADC | 009.3CC.DVS |
Ethernet Cable, RJ45 to RJ45, CAT 5e SHIELDED, 3m | 059.9123.000 |
PROFINET® Cable, RJ45 to RJ45, CAT 5e SHIELDED, 3m | 059.9128.000 |
*Cable packs do not include mains power lead. If required, order power leads suitable for your region.
Pump product codes | ||||
---|---|---|---|---|
Description | Supply | Speed (rpm) | with 114DV | with 114DVP |
114ST stepper motor drive | 24 VDC | 0 - 600 | 010.5Z2S.00A | 010.5Z2S.P0A |
# Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore
Tubing product codes for 114DV and 114DVP pumpheads | ||||||
---|---|---|---|---|---|---|
Bore/wall | Pumpsil | Marprene | Bioprene | STA-PURE PFL | PVC* | STA-PURE PCS |
0.5/1.6 mm | 913.A005.016 | 902.0005.016 | 933.0005.016 | |||
0.8/1.6 mm | 913.A008.016 | 902.0008.016 | 933.0008.016 | |||
1.6/1.6 mm | 913.A016.016 | 902.0016.016 | 933.0016.016 | 965.0016.016 | E3603.016.16 | 960.0016.016 |
2.4/1.6 mm | 913.A024.016 | 902.0024.016 | 933.0024.016 | |||
3.2/1.6 mm | 913.A032.016 | 902.0032.016 | 933.0032.016 | 965.0032.016 | E3603.032.16 | 960.0032.016 |
4.0/1.6 mm | 933.0040.016 | E3603.040.16 | ||||
4.8/1.6 mm | 913.A048.016 | 902.0048.016 | 933.0048.016 | 965.0048.016 | E3603.048.16 | 960.0048.016 |
*recommended for 114DVP +pressure pumphead only
Pump product codes | ||||
---|---|---|---|---|
Description | Supply | Speed (rpm) | with 114DV | with 114DVP |
114FD DC motor drive | 12 VDC | 60 | 010.5AM0.00A | 010.5AM0.P0A |
24 VDC | 60 | 010.5BM0.00A | 010.5BM0.P0A | |
12 VDC | 190 | 010.5AS0.00A | 010.5AS0.P0A | |
24 VDC | 190 | 010.5BS0.00A | 010.5BS0.P0A | |
12 VDC | 350 | 010.5AU0.00A# | 010.5AU0.P0A# | |
24 VDC | 350 | 010.5BU0.00A# | 010.5BU0.P0A# |
# Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore
Tubing product codes for 114DV and 114DVP pumpheads | ||||||
---|---|---|---|---|---|---|
Bore/wall | Pumpsil | Marprene | Bioprene | STA-PURE PFL | PVC* | STA-PURE PCS |
0.5/1.6 mm | 913.A005.016 | 902.0005.016 | 933.0005.016 | |||
0.8/1.6 mm | 913.A008.016 | 902.0008.016 | 933.0008.016 | |||
1.6/1.6 mm | 913.A016.016 | 902.0016.016 | 933.0016.016 | 965.0016.016 | E3603.016.16 | 960.0016.016 |
2.4/1.6 mm | 913.A024.016 | 902.0024.016 | 933.0024.016 | |||
3.2/1.6 mm | 913.A032.016 | 902.0032.016 | 933.0032.016 | 965.0032.016 | E3603.032.16 | 960.0032.016 |
4.0/1.6 mm | 933.0040.016 | E3603.040.16 | ||||
4.8/1.6 mm | 913.A048.016 | 902.0048.016 | 933.0048.016 | 965.0048.016 | E3603.048.16 | 960.0048.016 |
*recommended for 114DVP +pressure pumphead only
Pump product codes | ||
---|---|---|
Description | Motor control | Product code |
PMD24CV114 | 0 - 10 V | Contact your local Watson-Marlow representative |
PMD24CI114 | 4 - 20 mA | Contact your local Watson-Marlow representative |
For mounting plate options, test leads and further pumphead configurations, contact your local Watson-Marlow sales representative
Tubing product codes for 114DV and 114DVP pumpheads | ||||||
---|---|---|---|---|---|---|
Bore/wall | Pumpsil | Marprene | Bioprene | STA-PURE PFL | PVC* | STA-PURE PCS |
0.5/1.6 mm | 913.A005.016 | 902.0005.016 | 933.0005.016 | |||
0.8/1.6 mm | 913.A008.016 | 902.0008.016 | 933.0008.016 | |||
1.6/1.6 mm | 913.A016.016 | 902.0016.016 | 933.0016.016 | 965.0016.016 | E3603.016.16 | 960.0016.016 |
2.4/1.6 mm | 913.A024.016 | 902.0024.016 | 933.0024.016 | |||
3.2/1.6 mm | 913.A032.016 | 902.0032.016 | 933.0032.016 | 965.0032.016 | E3603.032.16 | 960.0032.016 |
4.0/1.6 mm | 933.0040.016 | E3603.040.16 | ||||
4.8/1.6 mm | 913.A048.016 | 902.0048.016 | 933.0048.016 | 965.0048.016 | E3603.048.16 | 960.0048.016 |
*recommended for 114DVP +pressure pumphead only
Iconic flip-pumps for low flows up to 510 ml/min. Accurate flow performance to medium pressures.
Pumpheads
Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).
Tubing - peristaltic
Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).
Tubing - peristaltic
Iconic flip-top pumps for flows to 2,000 ml/min. Extendable up to 6 channels.
Pumps - panel mount pumps
Our smallest pump for micro flows from 30 μl/min to 30 ml/min.
Pumps - panel mount pumps
One to three channel pumps for low flows to 82 ml/min. Supports three different tubing formats.
Pumps - panel mount pumps
One to eight channel pumps for medium flows to 200 ml/min. Compact design and Luer connectors for 'fit and forget' applications.
Pumps - panel mount pumps
Flexible, high quality designs which are well suited to custom projects.
Pumps - panel mount pumps
Precision pump for surgical cooling applications which require flow control to specified, high pressures.
Pumps - panel mount pumps
Durable, single channel pumps for high flows to 3,500 ml/min. Supports continuous tubing and Loadsure elements for high pressures.
Pumps - panel mount pumps
To order a product or ask a question